Our Seattle Window and Siding Company Is Here to Help

Homeowners who want to replace windows and siding on their properties sometimes struggle with where to start first. Should they replace windows first or should the siding be done first? How upgrades on a property are carried out can adversely affect the cost and quality of the work.

Some aspects of a building must naturally precede others if the work is to be done efficiently and cost-effectively, explains Sterling Property Solutions. When the steps are not done in the right order, an otherwise straightforward job can become very frustrating. So, which should come first; siding or windows?

The best answer is that both should be done at the same time. This is the ideal situation and the reasons for it are listed below:

        • It is cheaper for homeowners in the long run, even if they do need to write a bigger check at once. The savings can be found in the lower cost of materials and labor.
        • Simultaneously replacing windows and siding saves owners the back and forth of taking down the siding to install windows and then replacing them afterward.
        • This option gives owners the most control over how the final product turns out. They can choose style, color, and trim to match or complement one another.
        • Completing renovations of window and siding together allows homeowners to use a single contractor. This helps them avoid possible conflicts over who is responsible for what in the event of future problems.


However, given that in life things rarely happen in an ideal way, owners may not always be able to complete renovations concurrently. When it is not possible to replace windows and siding together, which should come first?

Windows should be done first. This is the most efficient and cost-effective path. Why is that?

  1. Damage to existing capping

Capping is the protective aluminum or sheet vinyl covering which is laid over exposed exterior wood trim on some homes. This material is fairly fragile and damages easily. And it is likely to get damaged in the process of removing the old siding.

This means that installing new siding will end up damaging the existing capping. This will leave owners with two undesirable outcomes; a brand new siding sitting next to the unsightly old capping or spending more money to buy new capping.

Furthermore, when they eventually decide to replace windows, the homeowner must buy new capping all over again.

2. More work and additional costs

Changing the siding first will result in homeowners spending more money than is necessary when they eventually want to replace windows. This is because to mount new windows, part of the siding must be removed to install the moisture barrier for the windows.

The step is necessary because the moisture barrier has to go behind the siding. But removing the siding during window installation may cause other problems:

If the siding is really old, it could break apart during the attempt to remove it. Replacing it will add unexpected costs to the project.

Removing siding adds an extra step to the window installation process. Each added step increases the overall cost of the project.

With more steps in the process, there is an increased chance that mistakes will occur during installation and impair the final finish.

3. Offers a better finish

Replacing windows first will allow contractors to do a better job since they have more room to set the capping exactly as it should be. Capping around a window helps to direct water away from the frame of the window and the interior walls of the property.

Properly installed window capping protects a building and impacts the structure‘s insulation and energy-management capabilities. A better result is obtained when the window is installed before siding; a move that could save owners a lot of money in the long run.

4. Fewer surprises

In the course of replacing windows, homeowners can never tell what they will discover which might impact the building’s siding. Windows affects siding more than siding affects windows.

Since the quantity of work that goes into siding depends on what is discovered during windows replacement, windows should come first in the process. If this sequence is not followed and siding is installed before windows, it may be necessary to remove or cut through the siding later.

If possible, property owners should hold off replacing windows and siding separately and save up until they can replace both at once. It is only when this option is out of reach that renovations can be done separately. And even then, windows should always come first.

Finally, as previously stated, it is best to install both siding and windows at once. Although this option places a bigger financial burden on owners, it actually costs less in the long run. The saving in cost is not just monetary but also in time, effort, and job quality.

Window tinting is a process in which a transparent film sheet is applied to the inside of the windows. In other words, a specific film is glued to the windows.

It helps reduce heat and UV rays of the sun that reaches insides. Particularly in the extremely hot weather conditions in Washington, it is even important to get your home windows tinted.

Here we have outlined the benefits of home window tinting.

Blocking Harmful UV Rays:

UV rays not only harm your skin but also cause furniture and carpet to fade and deteriorate quickly. Just put your chair near a window and notice how much faster it fades compared to furniture in rooms away from direct sunlight. Apart from that, UV rays lead artworks and books to fade. This is the key reason why you should get your windows filmed or tinted. Tinted windows block the UV rays by over 90%, thereby saving your skin and furniture.

Home Window Tinting

Improving the Energy Efficiency of Your Home:

By tinting your windows, you can improve the energy efficiency of your home. It will reduce heat in the summer and trap it in winter. It simply means that it will keep your house cool during summers, leading to less use of air conditioning. In winter, tinted windows trap warm air inside the house, thereby acting as insulation. This way, you end up minimizing heating costs and power bills in the long run.

Removing Glare:Excess glare not only strain your eyes but also leads to headaches. It is not easy to work on a computer with glaring all around. You may not get the best view of the TV screen due to excessive glaring. And it prompts you to increase the brightness of your smartphone so that you can see the screen. The solution lies in tinting.

Protecting Your Privacy:

Do people see a little too much of the things going inside? Another reason to get your window tinted. Tinted glass reduces the view to the outsides and a casual passerby.

Enhancing the Aesthetics of Your Home:

Tinted windows add to the styles of your home as well as increase its value to potential buyers.

So you must have understood the advantages of window tinting. If you are looking to get your window tinted or filmed, you can rely on 2FL’s professional window installation and tinting services in Washington and around. Contact us now at 866 – 908 – 2440!

Admit it! If you are like most homeowners, you believe in DIY window installations tips to save money on the installer. After all, this project seems easy (but it’s not), especially if you own some “handyman skills”.
However, we strongly recommend you to get this done from a professional window & siding installer. Online tutorials or DIY lessons might help you get the windows in the place, but minor imperfections can lead to sheer inconveniences down the road. Maybe the alignments go wrong.

Or you haven’t left the ideal gap between the partitions.
Therefore, this task should be left for a professional.
And here are some convincing reasons for hiring a pro window installer.

professional window & siding installer

Access to the Best Materials:
Professional window installers know where to get quality materials as they have suppliers on their network. And this is important as every single component determines the overall performance and aesthetics of your windows. That’s why getting quality material is an important factor in installing your window.

Essential Tools:
Proper tools are required to get the window installed appropriately. And most of these tools may not be in your home unless you’re a window installer. A pro window installer has all the important tools in their kit for a successful and safe installation of the windows.

Expert Advice:
When shopping for the right window, many factors, such as design, architectural style, energy efficiency, and materials, come into play. A window installer helps you make the right decision on such factors. They will discuss your requirements, budget and personal style to help you choose the right window.

If windows are not properly installed, they are likely to cause problems sooner or later. An experienced window installer is familiar with the ins and outs of the process.
Improper installation or poor sealing can lead to air leaks and energy loss as well. Only the professional installers know this and can thus, create efficient solutions. Even he can carry out the particular instructions given by manufacturers on some windows.
They will consider your personal preference and the home’s existing architecture before installing your window.

Quick Installation:
If you do the things on your own, a window project may lead to a lot of hassles and consume time as well. After all, you are not a trained window installer. Top of that, you may realize in the halfway of the project that you are not able to do this anymore, leaving your window open overnight which exposes your home to wildlife, insects, and burglars. By hiring a pro window installer, your windows will be installed faster and with almost no risk of poor installation.

“No Mess” Installation:
Walls stained with grease, broken pieces of glass, scattering of nails here and there and damages on the wall—this is how you can create a mess while installing the windows on your own.

Needless to say, you will have to clean up the mess with a DIY job.
But that’s not a case with a professional window installer. They have the most extensive experience and access to the best tools, ensuring that they will precisely do their job with little to no mess. And they will clean up the site as the job is over.

So you must have understood the benefits of hiring a professional window installer.
For your next window replacement in Washington and around, you can count on window installation services by 2FL. We have highly trained window installers who are both certified and experienced, thereby ensuring a total level of satisfaction. Call us today at 866-908-2440.

What do you think? Share your opinions with by commenting below!

Siding is a vital part of your home. Besides adding to the appeal of your home, it protects it from weather elements and maintains the right indoor environment.

Whether you are looking to repair the existing one or get installed a new siding, make sure toProfessional siding hire a professional siding installer or contractor. They are knowledgeable about the installation and maintenance of many types of styles and siding materials.

Here we will go through the benefits of hiring a professional siding contractor.


They Possess Experience and Knowledge:


From knowledge, experience to the tools, a professional siding contractor fulfills your requirement with everything that ensures you satisfactory service. He is familiar with the ins and outs of certain materials. He can guide you on which material can be best according to the condition of your property. Besides, he helps you choose the right color, style, and type of siding for your home. He implies the advanced techniques and materials to construct or replace the roof.


They are expected to meet the Deadlines:


Your project is likely to be disrupted by personal conflicts, vacations, family events or your day job. As a result, you may have to postpone the work in the middle. This makes your home prone to chaos due to the scattering of the materials here and there, affecting the curb appeal.


Siding contractor, on the other hand, will tell you about the time the project is likely to take to complete. This way, you can leave the work on them as it is there responsibility. In other words, you know that your siding will be installed, no matter the challenges to your schedule.


They are Insured and Licensed:


A siding contractor’s license is your assurance that the installation follows the local building codes. This also lets the contractor go through the paperwork, such as building permits, which would involve a lot of legwork if you decide to do the installation on your own. Their insurance covers general liability coverage and worker’s compensation. This way, having an insured and bonded contractor means that you have a protection against liability for injuries or damages.


They Have the Right Tools:


Installing or repairing a siding is a complicated task to do. However, many homeowners think that they can do the job with their ordinary tool kit that includes some pliers,repairing a siding drill machine, hammer, and nails. Keep in mind that siding installation requires a variety of tools that are found in the professional kit. One more thing—a professional installer knows when and how to use these tools.


Different types of siding need different and often special tools.


Not only will your installer have all the required tools, but they will have the vehicle to bring siding to your property. Siding is heavy and requires an appropriate mode of transportation for the materials. It simply means that you don’t need to get into such hassles. Just call them to get your siding installed or repaired. That’s it.

hiring a professional siding

So you must have understood the importance of hiring a professional siding contractor. Keep in mind that siding installation is a complicated job and should only be done by professionals. If you take the charge in your hands, you can end up with mess, damages and inappropriate installation.

Vinyl house siding is an affordable and low maintenance choice for glamming up your home exterior. Available in different patterns and style, vinyl siding is durable and requires little maintenance. Besides, it reduces home heating and cooling costs as it avoids heat loss between the wall studs in exteriors walls. No wonder that it was the most common exterior material used in over 32% houses across the USA.


Vinyl-SidingWhile it is the right decision to get vinyl siding installed, there are many things to consider before choosing vinyl siding. From colors, prices and energy efficiency to type, there are considerations to keep in mind while choosing vinyl siding.



Consider Climatic Condition of Your Area:


Climate Cantrol

Is your area prone to extreme heat or cold, high winds, hail or frequent storms? If so, look for the siding that can withstand all these weather elements. Go for weather tested vinyl siding that can endure harsh elements. Insulated siding or siding with foam is energy efficient and withstands mildew and mold. As an added bonus, it won’t fade, warp, crack or dent.

Consider Your Personal Taste and Home Architecture as Well:

While vinyl siding gives your home a sophisticated look, make sure to choose the one according to your personal taste as well as the architecture of your home. The batten vertical vinyl siding carries the charm of the 19th century. Cedar vinyl siding is another popular option and is available in wood grain, scalloped rounds, and rough cut snakes. It will give your home a Victorian or coastal New England appearance. Cedar creates a magnificent effect when combing with other vinyl sidings. Wood grain vinyl siding like wood bark wood-grain is a perfect addition to any home where a wood exterior is required. To minimize the appearance of a seam, you can go for extra-long vinyl siding.


Traits to Look for in Vinyl Siding:



Product Thickness

Thicker products are more durable and can withstand the knocks. Average vinyl siding comes with the thickness of 0.045” with thinner versions around 0.040 and thicker product at 0.054” thick.

Double Nailing Hem

Double nailing hem makes the panel stronger and less vulnerable to flexing and sagging. It also protects it from the knock of high winds.

Deeper Panel Projection

Deeper Panel Projection

Also known as deeper lap profiles, deeper panel projection provides bolder shadow lines giving a wonderful look of real wood. The deeper the panel projection is, the better the vinyl siding is.

Foam Backing

This feature makes the panel more durable, offering some insulating value and can add to the panel’s appearance.

Wind Speed Rating


Wind speed rating means the ability of the siding to resist high winds without being knocked off. A higher rating means the siding is effective at withstanding winds.


Unlike wood, vinyl requires no paint. However, it is not safe to say that vinyl is maintenance free. It should be washed annually to maintain its fresh appearance. It comes with its own maintenance issues.

Moisture beneath the vinyl siding will trigger the growth of mold and mildew and insect infestations as well. Left untreated, the dampness can blister pain and wallpaper inside the home. Therefore, a homeowner requires to fix joints between the vinyl siding and adjacent trim as well as roof leaks, faulty gutter and other sources of moisture.

If you own an old home with all these issues, vinyl siding may not be a great option for you.


It costs an average of about $4 a square foot when it comes to installing vinyl siding. Then, moldings, soffits and trimming work around doors and windows can lead to an additional cost of $3-$6 per linear foot. And the cost of vinyl siding installer or contractor varies. The removal of old siding may cost you $1000 to $ 3000. Besides, the prices of colors vary—pay more for exotic and rare colors.

Nearly 90% of houses in the USA have AC.

After all, AC has become the basic necessity to battle scorching heat. But it can’t be denied that AC makes up the most of the electricity bill.

The average monthly bill for central AC unit costs $110.88 while window unit costs around $45.60 per month (running for 8 hours a day). A ductless mini-spilt would cost nearly $28.50 per month.

Keeping AC on for most of the times not only add to your bill, but also causes several health problems like chronic headaches, fatigue, dry skin, and infectious respiratory diseases.

However, one can’t simply afford to live without AC when the USA is under the scorching heat wave.

Don’t worry! Here are some simple yet effective ways to keep your home cool. This way, you can minimize the usage of AC.

Keep Windows Open at Night:

Now, this is the point you may find extremely opposite to the starting one. Generally, the temperature comes down during the night in summers. And you can strike the opportunity by opening your windows to let the cool breeze in. But shut the windows in morning when the temperature starts sizzling.

2flwindowsandsidingUse Fan Instead of AC:

Whether it’s a ceiling fan or a table fan, all play a great role to keep your home cooler. They throw the cool air to the areas where it is needed, instead of making the entire house chill out like AC. Starting from ceiling fans, they take the air from the ground to send it to the ceiling, which is prevailed with the hot air. Box fans not only throw out the hot air but bring in the fresh and cool air, when they are placed near windows at night. On the other hand, whole house fan is even effective than the box fan. Make sure to adjust your ceiling fan every season: set them in an anticlockwise position for better results.

Close the Blinds:

The way to cool your home goes through the blinds. Remember nearly 30 percent of unwanted heat enters through the windows, curtains and shades. Keeping them closed means you have reduced your indoor temperature by nearly 15 to 20 percent. Broadly speaking, they don’t let your home to be turned into mini greenhouse only when they are closed.

Turn Off the Appliances:

Turning off your heat generating lights and appliances also help to keep your “den” cool. Switch off them when they are not in use. In this way, you not only keep your home cool but save a lot on the electricity bills. Use several heat and steam generating appliances like ovens, incandescent light, dryers, and washers in limit. You can use grills instead of turning on the 300 plus degree Celsius oven when the mercury is going up.

Plant Trees and Vines:

Plants and trees are the natural cooler shading your home’s exterior, thereby keeping your home cool. You can plant them towards the directions where the sunlight is severe, like the west facing side. Consider planting deciduous tree, which provides an excellent shade in summer and let the sun in temperature -drop in winters (as they shed their leaves). Make sure you’ve planted the trees native to your state as they can survive better in prevailing climate.
Consider the height, root spread and canopy width while planting a tree. Besides, climbing vines like ivy and creeper shield your home exterior against the sun rays at some extent. It’s ideal to plant them nearly 6 to 10 inches away from your dwelling to avoid their stem and root covering your walls.

Dealing with a broken window? Whether it was a wild throw by the children in your neighborhood or it was the freezing of water responsible for that crack, broken glass windows are painful for homemakers. While these shatter the exterior of your property, these can be problematic for maintaining optimal temperature inside.

Hence, if you have recently discovered the unfortunate event of the breaking of a window, you need to get it replaced. Though many homeowners would immediately call up a home improvement company in Washington, yet you can give it a try yourself. Want to know how?

Here is the step-by-step guide on how to replace a broken window:

Step 1: Remove the Broken Glass
  • Broken glass
  • Before you start with replacement, it is important to first remove a cracked pane of glass. For this you need to remove the putty from the window frame. Use a putty knife, wood chisel, or jackknife to remove every trace. To make sure you don’t get injured use protective gloves to protect your hands against cuts. Once you are done with putty removal, take out the broken glass.

    Pro tip: For those stubborn areas, use heat to soften the putty. You can run a blow dryer along the putty and then with chisel pull away the remaining putty from the wood frame.


Step 2: Prepare Your Older Frames
  • Older Window Fram
  • With the help of a small paintbrush, apply a heavy coat of linseed oil. Then leave oil to be completely soaked before proceeding further. Actually, linseed oil is helpful to maximize the life of the putty and prevents evaporating or drying out of the same. So saturate the wood with linseed oil to make it last much longer.

Step 3: Add New Putty Layer
  • Wall Putty layer
  • After oiling apply a very thin layer of putty around the frame. The base layer doesn’t need to be too thick as it is meant to provide a cushion for the new glass which has to be inserted. Basically, it will prevent the air from leaking around the glass. Hence, if you add a thick layer, it might swell or smudge, which could further impact clarity and visibility.

Step 4: New Glass Installation
  • window-glass-replacement
  • Remember, the replacement glass has to be exactly the right size. For this let the professional cut it to the size required. You can then insert the new windowpane into the frame. Press it firmly with one hand and use your free hand to insert Glazier’s points every 4 inches on each side. This will help secure the pane firmly. Or you can consider taking help of your partner or a friend, to avoid any risks. Start with the Glazier’s point using the point of a putty knife or a glazing tool.

Step 5: Preparing Putty
  • Wall Putty
  • Now when you have to place the putty, ensure the consistency to be dry and thick enough. In case, it is too stiff, you can thin it accordingly. Using an old piece of glass or a kneading board, work the putty into right shape and consistency. It has to be completely pliable and free of lumps. When ready, roll the prepared mixture into pencil-size strips and apply it in one corner of the window frame. Smooth it using a knife and hold the glazing tool at an angle for a smooth job. Cover the Glazier’s points nicely and if required you can paint the putty later.

    So replacing a window can be a manageable task. However, you need to be little more careful and follow the above stated steps with the right tools.

    If you need any kind of professional assistance, feel free to get in touch with 2FL Windows & Siding. Being a locally owned and operated home improvement company in Washington, we can serve you with all sorts of window replacement and installation services.

Are you looking to install vinyl siding on your own? Or you are looking for DIY ideas for a vinyl siding? Well, you can install vinyl siding on your own. However, do it yourself only when you have basic handyman skills like cutting, nailing and measuring. One more thing—do it only when you are confident enough.

This blog will cover important tools, preparations, and installation of vinyl siding.



  • Folding Ruler
  • Metal Square
  • Claw Hammer
  • Tin Snips
  • Power Saw
  • Chalk Line
  • Measuring Tape
  • Level
  • Utility Knife
  • Pliers
  • Nail Slot Punch
  • Saw
  • Hacksaw
  • Stepladder
  • Sawhorses
  • Pry Bar


  • Flashing
  • Building Paper
  • Corrosion Resistant Nails
  • Vinyl Siding
  • Vinyl Corners and Trim for Windows and Doors
  • Termination Trim

Prepare the Home for Installation

First of all, prepare the exterior of your home for vinyl siding installation. Here’s how…

  • Remove old caulk from around doors and windows.
  • Tighten loose boards and replace rotting ones.
  • Remove fixtures like exterior lights, molds, mailbox, house number, and downspouts.
  • Make sure the wall has a compatible finish for siding for vinyl siding.

Important Things to Keep in Mind before Getting Started

  • Leave an extra 0.06 cm gap between siding panels and accessories as vinyl siding expands and contract with a change in temperature.
  • Don’t drive the nails too tightly. There should be a gap of 0.2 cm between the nail head and the siding to avoid waves from occurring in the panels.
  • Drive the nail in the appropriate slot keeping them straight rather than crooked.

STEP 1: Install J Channel Pieces under the Fascia (a Point Where Siding Contacts a Soffit or Roof at an Angle) 

  • Keep the nails centered in the channel slot while the nail heads should be 1.6 mm out.
  • Box-type soffits will require a second J channel strip to be installed from the fascia to the edge of the home.
  • Install two J-channels diagonally where the corners of the roof and house meet.

STEP 2: Measure, Cut and Install the Soffit Pieces:

Install the Soffit Pieces

  • Measure and cut the pieces for soffit out of the vinyl siding. Cut them ¼ inch shorter than the actual length of the soffit as they expand in warm weather.
  • Fit each panel into the J-channel pressing them into the channel. You can also bend them if necessary. You can also use a pry bar if you have difficulty in pressing them.
  • Use galvanized or painted nails to secure the top edge of the fascia pieces.

STEP 4: Siding the Wall:

Siding the Wall

  • Use measure tape to measure the length of the walls from the eaves to the bottom to find out the number of panels you required.
  • Once you have decided the starting point for the siding, drive a nail through a point for starting height and draw a chalk line around the perimeter of the house.
  • Attach a piece of plywood nearly 89 mm thick along the top of the chalk line to hold out the bottom of the first-row siding.
  • Nailed the starter strip to the plywood leaving 0.6 cm gap between each starter strip.

STEP 5: Installing the Corner Posts:

Siding the Wall

  • Place 12.7 mm foam sheathing strips on both sides of each corner. Afterward, install your corner siding pieces to these strips.
  • The corner posts will go 1.9 cm below the bottom of the starter strip to just beneath the eaves, after the installation of soffit pieces.
  • Corner siding pieces should be completely straight before you secure them to the adjoining walls, going from top to bottom.
  • Install J-channel around doors and windows by placing them snugly against the casing before nailing them to the wall.

STEP 6: Start Installing the Wall Siding:


Installing the Wall Siding

  • Make sure to apply insulation materials to the walls before you install the siding.
  • Measure and cut the siding’s length to keep them 12.7 mm away from the vertical trim pieces. Leave 1.0 cm gap if you living in freezing conditions.
  • Get the bottom row of panels into place, hooking the bottom lip of each panel under the starting strip. Use nails every 40.6 cm across the siding to secure the panels.
  • Overlap to adjoining panels by about 25.40 mm.


STEP 7: Install Siding Around Windows:



  • Cut sections from the panels directly above and below as you reach to a window.
  • Hold the slide against the window so that you can mark the width for the right measurements. Make sure to leave 0.6 cm of clearance on either side of these marks.
  • Measure the height of the slide you need to cut by keep the pieces beneath and above the window and make marks accordingly leaving an additional 0.6 cm.
  • Use a saw to make the vertical cuts on the siding panel while the horizontal cut will be made with a utility knife. Cut out the piece of the slide. Place those pieces of siding above and below the windows.


STEP 8: Installing the Top Siding Row

Siding Row

Measure and cut the piece to fit as you reach the top row of siding. All you need to measure the distance between the top of the under-sill trim and the lock on the next panel down. Make sure to leave an additional 0.6 cm. Slide the bottom edge of the panel into the panel below while the top edge will go under the under-sill trim.

So these are the DIY method to install vinyl siding. However, as we have said earlier, do this only if you have faith in your skills and confidence as well. Otherwise, it is better to get it done by an experienced vinyl siding installer. You can even call them if you feel it complicated in the middle of the project.

What do you think? Please let us know by commenting below.




Replacement windows are one of the crucial home improvements you make. However, it is not easy to choose the one due to the overwhelming numbers and claims made by the manufacturers.

How to tell if the certain replacement windows are the best?

If you are looking or the highest quality replacement windows, you can follow the guidelines set by the American Architectural Manufacturers Associations and the National Manufacturers Association. They provide valuable information to help homeowners determine and compare the energy performance of not just windows, but also lights and doors. The best thing about them is that they provide an unbiased and uniform rating.

So what features they look in a window? Why each criterion does matter? Based on their evaluation, here we have come up with this guide to help you make the right decision when it comes to replacing windows.

Sound Transmission Class (STC):


Vinyl Siding in Kent

STC ratings are used to find out how much sound escapes through a material. These ratings are common for building products like walls, doors, and windows. Double-paned windows have STC ratings between 28 and 35. Choose the glass with more thickness and airspace to more soundproof benefit.


Visible Transmittance (VT):


A window’s VT determines the incoming of light through it. VT is scaled from 0 to 1. Higher VT means the higher transmission of the light. For examwindow replacementple, an ordinary sheet of clear glass comes with a VT of .93, meaning that 93 percent of the light that falls on the glass will pass through. Different type of glasses has different VTs. Adding tint or coating to the glass can affect the efficiency of the glass.


Air Leakage (AL):


 vinyl window replacement

Air leakage or AL rating is based on the cubic feet of air passing through a square foot of window area. Heat loss and gain are caused by infiltration through cracks present in the window assembly. Generally, lower AL will minimize the loss of less conditioned air to outside while restricted the access of outside air inside.

Condensation Resistance or CR:

Condensation Resistance or CR is used to determine the ability of a window to resist condensation on the surface located inside. Prefer the window with higher CR rating as they are better at resisting the formation of condensation.


U-Factor is used to measure the rate of heat transfer and insulation of the window. Commonly falls between 0.30 and 1.20, windows with the lowest U-Factor are great at insulating and heat resistance. Plus, these windows keep your home warmer in winter and cooler in summer.

Solar Heat Gain Coefficient or SHGC:


vinyl windows

The SHGC of a window is used to determine its efficiency in blocking heat caused by sunlight. If a window has a lower SHGC, it would transmit the less solar heat. Homeowners who reside in a warm climate require windows with a low SHGC to avoid getting overheated. In cooler areas, prefer the one with lower SHGC as it will let your home stay warmer in winter.

So these are some ratings or factors to make an informed decision when it comes to window replacement. What do you think? Please let us know by commenting below.

Warped or damaged window sash, fogged glass and decreased energy efficiency are the indications that you need to change your windows.

Driven by the resolution to get your window changed on weekend, you randomly choose any replacement company.

However, finding the right window replacement company is overwhelming, especially in today’s scenario when there are so many to choose from. And if you’re replacing your windows for the very first time, make sure to know your need. You can talk to your family and friends for getting recommendations. After all, replacement windows are important for your safety, home, and comfort.

Apart from that, it is important to conduct your own research.

And these are the points to consider in your research.



Choose the company you can trust.

This is because there are some companies who may disappoint with their inferior practices and inexperienced workers. While the things may look fixed up, for the time being, you can experience conveniences due to their faulty work down the road.

This is why you should choose the company that you can trust. First of all, they should be experienced and have positive reviews as well. Also, ask for references to find out if they are a reliable company.


Cost -2fl

Replacing window is a significant investment, and you want your new window look great and last longer. While you are likely to get them on cheaper rates, bargain windows may not of that quality. Frankly speaking, a high-quality window will cost you more.

Coming to the cost of window replacement, it can cost you anywhere between $450 and $600 including installment. However, wood windows are more expensive as they can cost you between $800 and $100 per installation. And add extra $50-$100 if the entire window and framing has to be removed.

Glass Options:


Many window companies talk about their energy efficient window glasses. Make sure they can live up to their claims. Energy efficient windows come with actual ENERGY STAR® certification. Besides, check the actual specification and ratings of the glass so you can set other options on the comparison. Also, consider your climate and home environment. Will your window be prone to extreme temperature? Is noise a concern? Are you looking for more strength with impact-resistant window glass? Compare the glass of each brand according to your requirements.

Certified Installations:

No matter how the highest quality window you have, a poor installation can affect its performance or the way it looks. Some window manufacturers certify their installers to expertly install for their products. These installing companies are supposed to be trained and expert in the company’s windows. Further, the companies may also train and certify contractors for window installations for larger remodels. Therefore, it is important to check the certifications of your installer so that you can be assured of their quality.




Most homeowners are not aware of a product’s warranty until they come across a problem in it. Therefore, a good manufacturer’s warranty is helpful down the road. However, the length and conditions of a warranty are varied by a manufacturer. Having a strong warranty means that the replacement company has faith and confidence in their products.

So these are the things to look for in your window replacement company. Luckily, we live up to all these metrics given above. We at 2Fl offer high quality bonded and insured window installation and replacement services. Our services are available for residential and commercial projects.

So wait no more and call us now at 866 – 908 – 2440 to get your window replaced in Washington and around.